Company name: nanyang star environmental protection equipment co. LTD
E-mail: 616330040 @qq.com
Address: longsheng industrial park, wolong district, nanyang city
Because of the frequent appearance of haze weather, the topic of most discussion and debate this year is the dust precipitator of asphalt station. In order to maintain the purifying signs of the situation, the duster is the only choice. How do we maintain the temperature of the dust bucket on the dust catcher of the bitumen station?
The outside area of dust collector dust bucket is very big, the application frequency of ash discharge valve is still, it is to want the manufacturing through the heart, ability avoids leakage of wind, in order to complete the request of the welcome of smooth and smooth flow of ash. Regardless of the dust collector or the end of the operation, to improve the wind dust catcher, cold here belongs to the filter area, begin to condensation occurred here, except provoked corrupt will incur wet ash accumulation, make filter applications.
Can manipulate the crux of the ash hopper disorders is guaranteeing the temperature above the dew point temperature of the request, with external can filter and the dust of the boring, boring dust suction can, external activities in asphalt filter function is good. Is, must insist the temperature of the dust collector bucket of asphalt station. To adhere to the dust collector bucket temperature, we can from the following points as a reference:
1. The outer wall of the ash hopper is insulated according to regional requirements to reduce heat dissipation. The outer wall is equipped with a heater to increase the temperature normally.
2, request for ash hopper, can adopt the lower into the wind, the method of dealing with more wind can also adopt department into the bottom ash hopper into wind, to stick to the heat, heat the space of ash hopper.
3. Reflect on the door, the connecting hole of each section and the ash discharge valve insist that the air should not leak out carefully, and the door and hole of the clean end should be even small.
4. The ash discharging port of the screw machine shall be equipped with a closed discharging device, such as a reverse rolling discharging device.
5. Maintain a certain amount of ash accumulation in the ash hopper to avoid cold air leakage when unloading, and use ash accumulation for heat preservation.